A three-phase oil-cooled servo stabilizer is designed to regulate and stabilize the incoming three-phase AC voltage. The device uses a combination of a servo motor-driven mechanism and an advanced electronic circuit to maintain a stable output voltage to achieve the specified rated voltage range. The three-phase oil-cooled servo stabilizer consists of three independent voltage regulators, one for each phase which is used to step down the incoming voltage to a lower level. This is then rectified and filtered to produce a DC voltage which is then fed to a servo motor that drives the output voltage to the desired level. The oil-cooled design of the three-phase servo stabilizer provides superior heat dissipation, enabling high efficiency and being suitable for high-voltage applications. The oil also helps to protect the components from moisture and dust, increasing the longevity of the device. The three-phase oil-cooled servo stabilizer is commonly used in industrial applications, such as manufacturing plants, R&D, data centres, hospitals, and also in residential and commercial settings where a stable voltage supply is required for sensitive electronic equipment.
Some of the key features of the three-phase oil-cooled servo stabilizer include:
The three-phase oil-cooled servo stabilizer is, thus, a highly reliable and efficient solution for maintaining a stable voltage supply in high-demand applications. For our technical specs, please refer below-
Range: | 300 V – 460 V AC 50 Hz 3 PH |
Other Input Ranges: | 245 V- 460 V AC 3Ph/ 340 V- 460 V AC 3Ph/ 360 V- 460 V AC 3Ph |
Frequency: | 47Hz to 53 Hz |
Output Voltage: | 380 V / 400 V/ 415 V AC 3Ph 50 Hz |
Unbalanced 4 Wire : | R Y B N |
Connections: | Star |
Output Voltage Adjustable: | 380 V to 415 V AC in 3Ph/ 220 V to 240 V AC in 1Ph/ |
Output Voltage Regulation: | ± 1% |
Over Load Capacity: | 120% |
Correction Rate: | 15 V / 20 V / 35 V / Sec-1Ph/25 V / 35 V / 60 V / Sec-3Ph/110V/Sec for D.C. |
Waveform Distortion: | Nil |
Output Waveform: | True Reproduction of Input |
Insulation: | Class 'B' |
Short CKT Period & percentage: | 300 % for 250 m.sec. |
Normal Operating Temperature: | 0ºC to 45ºC |
Climatic Conditions: | 90 % RH.Max.Non-Condensing at 35º C |
Mode of System: | Fully Automatic / Manual |
Own manufacturing Unit in Delhi | Pan India Supply | Export to Nepal,
Gulf and African Countries
Copyright 2022 © Gayatri Industry All Rights Reserved. || Designed by: Ebrand Promotech