Servo Stabilizer Hoshiarpur

Electrical energy is an essential part of our daily lives, powering everything from lightbulbs to massive industrial machinery. Unfortunately, power distribution lines are prone to voltage fluctuations which can be detrimental to these electrical systems. To address this issue, humans have tried both manual and automatic methods for decades, but the most reliable solution is the servo controlled voltage stabilizer. This device utilizes a combination of high-quality components, circuits and control units to ensure uninterrupted power supply and protect your electronics and equipment. Research and development in the field has led to the creation of an advanced servo voltage stabilizer that is now widely accepted as the most accurate way of regulating electrical energy.

How does it work?

Stabilizers are implemented both domestically and commercially to address the issues of voltage fluctuation. As we know, electrical equipment can only operate at its optimal performance when supplied a consistent voltage. Servo voltage stabilizers are designed for this purpose, assisting in the regulation of both input and output voltages to maintain a steady level. Without one, countless electrical and electronic devices would be susceptible to under/overvoltage damage. With help from a stabilizer however, they can remain safe and operating effectively.

The servo motor is fitted onto a control circuit which monitors output voltage against the in-built power source acting as a reference voltage. In case of fluctuations, the amplifier and variable transformer work together to feed the buck boost transformer. This regulator stabilizes the voltage by measuring resultant error voltage with the reference one, thus controlling the servo motor.

Features:

The engineers and management professionals at the helm of this manufacturing plant are highly skilled. Their deep and consistent research into electrical energy and voltage fluctuation has enabled them to produce a safe, reliable and accurate servo voltage stabilizer. The components chosen for the assembly ensure a fast, high correction ratio is maintained even with voltage fluctuations during operation. This commitment to excellence has resulted in a product that delivers reliable performance, both for small scale equipment and heavy electrical equipment alike. The unit itself is encased in a sheet metal cabinet with excellent ventilation and sprayed on lacquer finish paint which complements its sleek design and makes it highly resistant to corrosion, thereby providing extended life cycles.

Some basic components features includes:

Auto transformer with variable and continuous voltage as per the requirement of the electrical equipment.
The buck boost transformer which is optional in case of following configuration; a stabilizer with a capacity of 10 KVA, 1Ph/30 KVA 3 ph.
The motor used in the whole voltage fluctuating controlling process is synchronous with an advantage of constant speed for an efficient conversion of AC energy into a work to provide correction in the power factor.
And a control panel.

Design features of servo voltage stabilizer :

SS control circuit with zero relays and warm up time providing the high reliability for the eminent performance of the equipment.
Providing the efficiency over 97 %.
The high reliability with the synchronous servo motor.
Negligible distortion in the waveform.
The construction with rugged design and components.
The 99.9 % copper winding for all the transformer on the CR lamination delivering higher efficiency along with the minimal losses of voltage, less temperature rising issue, and a strong bearing capacity during the climatic change.
As high as one percent regulation which is excellent for the efficacy of the equipment.
Fitted with the voltmeter detecting and indicating input and output voltage.
The capability of adjusting the output voltage in accordance with the specified limit using the screwdriver.
The mode of stabilizer's working can be selected using the auto-manual selector; manual function during the automatic control fault and failure without compromising with the working and efficiency of the stabilizer.
Push button for marking the lowering and increasing the output power supply by the servo stabilizer during the manual mode.
The printed circuit board can be easily replaced and serviced when in need easing the whole operation.
The LED indication during the peak voltage and lowest input voltage.

Some optional features of servo voltage stabilizer

In addition to the basic and design features, servo voltage stabilizer caters with some optional features as per the need of the electrical devices used in varied fields.

These are as follows:

The alarming system for the efficient indication during the high and low input voltage.
Smooth functioning
The single phase preventer.
Fitted with digital voltmeter and digital ammeter in case of digital voltage stabilizer.
Miniature circuit breaker and menas moulded case circuit breaker for both input and output power supply preventing the devices from getting damaged due to excessive current.