Servo Stabilizer Jabalpur

The electricity which flows through our daily lives, from tiny bulbs to large pieces of machinery, has a crucial importance. This power, however, is not always consistent and may often fluctuate in voltage. As such, humans have spent many years trying to devise different manual and automatic methods to combat these inconsistent power supplies. Consequently, the most reliable solution - the servo controlled voltage stabilizer - was created. This combination of control units, electrical circuits and high standard components provide quality results, which successfully address any gaps in the electrical equipment. Therefore, it is no wonder why the servo voltage stabilizer is now so widely accepted.

How does it work?

Stabilizers are utilized widely in both domestic and commercial settings to counter the issue of voltage fluctuation. As is well known, electrical appliances can only run properly at their designated power rating. Servo voltage stabilizers enable this through the operation of machinery, keeping an even balance between input and output voltages. Over- or under-voltage situations leave electrical or electronic things exposed to severe harm, but with a stabilizer, this is combated by regulating the voltage, allowing constant power levels.

The servo motor inside is controlled by the control circuit, which monitors the output voltage compared to an in-built power source as a reference. When any changes occur in the voltage, it is detected by the control circuit, causing it to operate the servo motor. For smooth operation, an amplifier and variable transformer feed a buck boost transformer which then stabilizes any voltage fluctuations; this is achieved by measuring any error voltage versus the reference and activating accordingly.

Features:

Highly skilled engineers and esteemed management personnel are experts when it comes to manufacturing the very best servo voltage stabilizers. This company is dedicated to the research and development of electrical energy, as well as rescuing their customers from volts fluctuations. The components used in the production process allow for quick adjustments, with a high correction ratio against any potential problems. As a result, both small and large electrical equipment can operate without any trouble or inefficiency. The enclosure is also defended by sheet metal components, designed with full ventilation and sprayed with lacquer finishes for a robust coating against corrosion. In conclusion, these measures make the servo voltage stabilizer both stylish and resistant to deterioration, ensuring dependable service over its lifetime.

Some basic components features includes:

Auto transformer with variable and continuous voltage as per the requirement of the electrical equipment.
The buck boost transformer which is optional in case of following configuration; a stabilizer with a capacity of 10 KVA, 1Ph/30 KVA 3 ph.
The motor used in the whole voltage fluctuating controlling process is synchronous with an advantage of constant speed for an efficient conversion of AC energy into a work to provide correction in the power factor.
And a control panel.

Design features of servo voltage stabilizer :

SS control circuit with zero relays and warm up time providing the high reliability for the eminent performance of the equipment.
Providing the efficiency over 97 %.
The high reliability with the synchronous servo motor.
Negligible distortion in the waveform.
The construction with rugged design and components.
The 99.9 % copper winding for all the transformer on the CR lamination delivering higher efficiency along with the minimal losses of voltage, less temperature rising issue, and a strong bearing capacity during the climatic change.
As high as one percent regulation which is excellent for the efficacy of the equipment.
Fitted with the voltmeter detecting and indicating input and output voltage.
The capability of adjusting the output voltage in accordance with the specified limit using the screwdriver.
The mode of stabilizer's working can be selected using the auto-manual selector; manual function during the automatic control fault and failure without compromising with the working and efficiency of the stabilizer.
Push button for marking the lowering and increasing the output power supply by the servo stabilizer during the manual mode.
The printed circuit board can be easily replaced and serviced when in need easing the whole operation.
The LED indication during the peak voltage and lowest input voltage.

Some optional features of servo voltage stabilizer

In addition to the basic and design features, servo voltage stabilizer caters with some optional features as per the need of the electrical devices used in varied fields.

These are as follows:

The alarming system for the efficient indication during the high and low input voltage.
Smooth functioning
The single phase preventer.
Fitted with digital voltmeter and digital ammeter in case of digital voltage stabilizer.
Miniature circuit breaker and menas moulded case circuit breaker for both input and output power supply preventing the devices from getting damaged due to excessive current.